Krix seismix 3 MK6 Subwoofer

$1,195.00

Category:
  • Description
  • Additional Information
  • Reviews (0)
  • Warranty & Returns

Product Description

  • Effortlessly delivers high impact for movies
  • Tight bass for the subtleties of music
  • Big bass performance with clarity

Bring low frequency effects to life with this tight yet powerful subwoofer. Experience movies as the director intended.

Available Finishes (Prices May Vary)

krix-finishes

HIGH IMPACT

For a deep bass experience that will move the earth without costing the earth, the Seismix 3 Mk6 subwoofer is sure to rock your world.

You won’t have to sacrifice musicality for low frequency output with this tuneful speaker that will allow you to truly feel the rumble of bass with supreme clarity.

A front-firing, vented subwoofer, the Seismix 3 Mk6 features a Krix designed 275mm long throw bass driver, developed specifically for high-level low frequency reinforcement. Enhanced geometry within the magnet structure increases linear cone travel by a whopping 30 percent and allows superior driver control, while the built-in high performance class D amplifier delivers increased sound efficiency with lower power consumption.

Not only capable of effortlessly producing seriously deep bass for your home theatre or sound system, the Seismix 3 Mk6 is available in five genuine timber veneer finishes or classic black woodgrain.

For the ultimate sound experience at home, play it through Krix.

SPECIFICATIONS

Frequency Range
22Hz-200Hz in room response

Amplifier Power
300 watts RMS

Output
122dB maximum SPL in room response

Inputs

Stereo line level RCA

Enclosure Type
Bass reflex, front vented

Dimensions
450mm high x 360mm wide x 410mm deep

Low Frequency Driver
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2″) voice coil wound on high powered Kapton former, with vented magnet assembly

Power On/Off
Adjustable Auto/Always On

Phase Select
0º to 180º continuously variable (relative to input signal)

Low Pass Filter

50Hz-200Hz or bypass

Weight

18kg each

SPECIFICATIONS
Frequency Range
90Hz-20kHz in room response

Power Handling
10 – 80 Watts RMS recommended amplifier power

Sensitivity
87dB for 2.83 volts at 1 metre

Impedance
Nominally 8 Ohms (minimum 7.5 Ohms)

Configuration
Full Range

Enclosure Type
Acoustically treated infinite baffle

Dimensions
95mm diameter x 108mm mounting depth

Full Frequency Driver
Nominal 75mm (3”) polypropylene cone, with a 20mm (¾”) voice coil wound on an aluminium former and neodymium magnet

Input Terminals
Spring terminals

Cut-out Diameter
82mm to 88mm recommended

Weight
0.5 kg each

Additional Information

Brand

Krix

Reviews

There are no reviews yet.


Be the first to review “Krix seismix 3 MK6 Subwoofer”